Shown
above is our DJ Facade with Option 2 lighting
For
the DJ that demands an impressive DJ Facade that will
boost your DJ image and visual presentation, using
a variety of stimulating lighting effects, our portable
and durable facades are the right choice. Possibly
the best built facades on the market as we do not
use wood frames, but aluminum frames that will stand
up to the stress that constant transporting can cause.
We
have a line of DJ Facades, and Front boards that are
lightweight and sturdy, with 1/4" thick white
translucent acrylic front surfaces.
DJ
Facade Features:
- Aluminum
frames, 1
1/2" deep
- A
variety of powder coat finishes available
for frames
- More
sturdy and durable over wood frames
- Center
and end frames are
easily pivoted with hinges to open or close
facade
-
High grade 1/4"
white translucent acrylic for optimum effects
- Custom
sizes available
- Variety
of lighting options available
-
1/8"
white ABS plastic back panel
|
Our Standard DJ Facade Sizes:
Center
Panel: 48"W
x 48"H
End Panels:
24" W x 48"H (2)
Center
Panel: 60"W
x 48"H
End Panels:
24" W x 48"H (2)
Center
Panel: 72"W
x 48"H
End Panels:
24" W x 48"H (2)
|
Lighting
Options for Your DJ Facade
Lighting
Option 1: Color Changing LED Flex Strips
Very
bright and comes with two controllers with one remote.
Can do color-fade, color-snap, white strobe and fixed
color and more.
User can dim the lights.
User can adjust the speed of color change on the color-fade,
color snap or strobe mode.
This
would be the most economical lighting option.
You
have the option of having the colors for the end panels
be different than the center panel
No
chasing effects with option 1
24x48x24 DJ Facade with Opt 1 Lighting
with 2 controllers
and one remote
|
Price
$4,925
with
Satin Black Finish |
Lighting
Option 2: Color-Changing Chasing
LED Effects in Center Panel and Non-Chasing LEDs in
the end panels
Note:
Chasing LED Flex strips are in the center panel only
but can also be used in the end panels for additional
cost.
This
would be the next most economical and effective lighting
option and has 99 effects, mostly chasing colors and
is far more dramatic than option 1. User
is limited to the preset shows and the color combinations
that the controller provides. For example; if you
wanted the center panel to have red and yellow lights,
this option may or may not provide that. With option
3 the user can created any color combinations
End
Panel lighting: Color-changing LEDs, NO chasing
Very
bright and comes with a controller with a remote.
Can do color-fade, color-snap, white strobe and fixed
color.
User can dim the lights on fixed mode
User can adjust the speed of color change on the color-fade,
color snap or strobe mode.
24x48x24
DJ Facade with Opt 2 Lighting
Controller with 99 effects for center
panel and color changing LEDs with IR remote for end
panels
Price
$5,275
with
Satin Black Finish
Lighting
Option 3: Color-Changing, Fully
Programmable Chasing LED Effects in Center
Panel and Non-Chasing LEDs in the end panels.
Note:
Our programmable LEDs provide the most versatiliy
for our DJ Facades since the effects/shows can be
programmed with any color combination desired.
For example; if you wanted the center panel to have
red and yellow lights or blue and green then this
option can provide that.
End
Panel lighting: Color-changing LEDs, NO chasing
Very
bright and comes with a controller with a remote.
Can do color-fade, color-snap, white strobe and fixed
color.
User can dim the lights on fixed mode
User can adjust the speed of color change on the color-fade,
color snap or strobe mode.
24x48x24
DJ Facade with Opt 3 Lighting
Note:
Our new LEDs for this option have more LEDs than shown
and are closer together with less spacing between
LEDs.
Price
$5695
with
Satin Black Finish
DJ
Facade with Opt 2 Lighting, used in MTV dance competition
show
Watch
Videos of our DJ Facade
Click
Here
Move
your cursor over image to see facade opened
Note:
Our 24x48x24 DJ Facade without Lighting
Price: $3995
with
Satin Black Finish
For our
Basic DJ Facade we use white ABS plastic for the back
panels as white reflects more light back onto the
white acrylic front surface.
Black ABS is available but is not recommended for
our Basic DJ Fasade for this reason.
This
dj facade is for Lighting Options 1, 2 and 3
Plug
and Play
Operation:
Shown
to the left is a 12 volt, 350 watts power supply which
is attached to the rear of the center panel.
Cables
from the power supply have male plugs which plug into
the female jacks at the bottom of each panel to power
the LEDs.
Our
Basic DJ Facades with client logos installed in center
panel.
Please
call to inquire
Email
us - or Call Us at 818-565-1033
for more information or to place an order
|